ІНЖЕНЕРНЕ УПРАВЛІННЯ ТЕХНІЧНИМ ОБСЛУГОВУВАННЯМ ПІД ЧАС ЗБЕРІГАННЯ ЗБЕРІГАЛЬНИХ КОМБАЙНІВ
Ключові слова:
analyse, organization, system, combine harvester, conditionАнотація
При проектуванні зернозбиральних комбайнів основна увага завжди відволікалася на питання продуктивності та техніко-економічні показники (ремонтопридатність, витрати життєвого циклу тощо). Однак прагнення досягти вищих характеристик зразків зернозбиральних комбайнів призвело до необхідності оснащення їх складною авіонікою. В результаті, конструкція зернозбирального комбайна значно ускладнилася, а процес технічного обслуговування та ремонту вимагав додаткових робіт та збільшення вартості технічного обслуговування та ремонту. Це було особливо помітно для зернозбиральних комбайнів нового покоління. Аналізуючи парк зернозбиральних комбайнів в Україні та порядок його експлуатації, можна констатувати факт його меншої надійності, а також збільшення витрат праці на технічне обслуговування, збільшення простоїв зернозбиральних комбайнів без їх функціонального використання, що знижувало показники їхньої готовності до виконання поставлених завдань. Було визнано той факт, що надійність та ремонтопридатність зернозбиральних комбайнів слід відносити до основних характеристик, від яких залежить їхня готовність до безпечного використання. Успішне вирішення
проблеми максимально ефективного використання всіх технічних та експлуатаційних можливостей зернозбиральних комбайнів з їх
високою готовністю до використання залежить від того, наскільки організаційна структура служби технічного огляду та форми
експлуатації відповідають рівню її експлуатаційних властивостей та ступеню досконалості засобів її експлуатації,
тобто від прийнятої системи технічного обслуговування та ремонту. Всі інші фактори мають другорядне значення, а також
залежать від стану та якості експлуатаційного обладнання, що обслуговується та ремонтується. Відомо, що в структурі
витрат, які знижують рентабельність та збільшують експлуатаційні витрати зернозбиральних комбайнів, витрати, пов'язані з
технічним обслуговуванням та ремонтом, становлять 20-30%, посідаючи друге місце після витрат на паливо. А критична ситуація з фінансуванням, неприпустимо низький
стан зернозбиральних комбайнів висувають низку пріоритетних питань розвитку та вдосконалення
системи технічного обслуговування та ремонту. Ефективність функціонування системи технічного обслуговування та ремонту
суттєво залежить від ефективності роботи підсистеми комбайнів. Це ставить низку актуальних дослідницьких завдань щодо оцінки впливу підсистемного відновлення складних технічних систем на ефективність процесу технічної експлуатації.
Посилання
Astashev V., Krupenin V. 2017. Efficiency of vibration
machines. Proceedings of 16th International
Scientific Conference “Engineering for rural
development”. Jelgava, Latvia, May 24-26, Latvia
University of Agriculture. Faculty of Engineering,
: 108-113.
Drga R., Janacova D., Charvatova H. 2016. Simulation
of the PIR detector active function. Proceedings of
th International conference on Circuits,
Systems, Communications and Computers (CSCC
, July 14-17, 2016, E D P Sciences, 17 Ave
Du Hoggar Parc D Activites Coutaboeuf Bp 112,
F-91944 Cedex A, France, 76, UNSP 04036.
Dubbini M., Pezzuolo A., De Giglio M.,
Gattelli M., Curzio L., Covi D., Yezekyan T.,
Marinello F. 2017. Last generation instrument for
agriculture multispectral data collection. CIGR
Journal, 19: 158-163.
Kuzmich I. M., Rogovskii I. L., Titova L. L.,
Nadtochiy O. V. 2021. Research of passage
capacity of combine harvesters depending on
agrobiological state of bread mass. IOP Conference
Series: Earth and Environmental Science. 677.
https://doi.org/ 10.1088/ 1755-
/677/5/052002.
Luo A.C.J., Guo Y. 2013. Vibro-impact Dynamics.
Berlin: Springer-Verlag: 213.
Masek J., Novak P., Jasinskas A. 2017. Evaluation of
combine harvester operation costs in different
working conditions. Proceedings of 16th
International Scientific Conference “Engineering
for rural development”. Jelgava, Latvia, May 24-26,
Latvia University of Agriculture. Faculty of
Engineering, 16: 1180-1185.
Nazarenko I., Mishchuk Y., Mishchuk D.,
Ruchynskyi M., Rogovskii I., Mikhailova L.,
Titova L., Berezovyi M., Shatrov R. 2021.
Determiantion of energy characteristics of material
destruction in the crushing chamber of the vibration
crusher. Eastern-European Journal of Enterprise
Technologies, 4(7(112): 41–49.
https://doi.org/10.15587/1729-4061.2021. 239292.
Novotny J. 2016. Technical and natural sciences teaching
at engineering faculty of FPTM UJEP. Proceedings
of 15th International Scientific Conference
“Engineering for rural development”. Jelgava,
Latvia, May 23-25, Latvia University of
Agriculture. Faculty of Engineering, 15: 16-20.
Palamarchuk Igor, Rogogvskii Ivan, Titova Liudmyla,
Omelyanov Oleg. 2021. Experimental evaluation of
energy parameters of volumetric vibroseparation of
bulk feed from grain. Engineering for Rural
Development, 20: 1761-1767.
https://doi.org/10.22616/ERDev.2021. 20.TF386.
Pinzi S., Cubero-Atienza A.J., Dorado M.P. 2016. Vibroacoustic analysis procedures for the evaluation of
the sound insulation characteristics of agricultural
machinery. Journal of Sound and Vibration, 266
(3): 407-441.
Rogovskii I. L., Titova L. L. 2021а. Change of technical
condition and productivity of grain harvesters
depending on term of operation. IOP Conference
Series: Earth and Environmental Science. 720.
/720/1/012110.
Rogovskii I. L., Titova L. L. 2021b. Design of landing of
assembly machine building units with circulating
load rolling bearing rings. Journal of Physics:
Conference Series. 1889. 042004.
https://doi.org/10.1088/1742-6596/1889/4/042004.
Rogovskii I. L., Titova L. L. 2021c. Modeling of
normativity of criteria of technical level of forage
harvesters combines. IOP Conference Series: Earth
and Environmental Science. 720. 012109.
https://doi.org/ 10.1088/1755-1315/720/1/012109.
Rogovskii I. L., Titova L. L. 2021d. Modeling the weight
of criteria for determining the technical level of
agricultural machines. IOP Conference Series:
Earth and Environmental Science. 677. 022100.
https://doi.org/ 10.1088/1755-1315/677/2/022100.
Rogovskii I. L., Titova L. L., Berezova L. V. 2021e.
Conceptual bases of system technology of
designing of logistic schemes of harvesting and
transportation of grain crops. IOP Conference
Series: Earth and Environmental Science. 723.
/723/3/032032.
Rogovskii I. L., Titova L. L., Gumenyuk Yu. O.,
Nadtochiy O. V. 2021f. Technological
effectiveness of formation of planting furrow by
working body of passive type of orchard planting
machine. IOP Conference Series: Earth and
Environmental Science. 839. 052055.
https://doi.org/10.1088/1755-1315/839/5/052055.
Rogovskii I. L., Titova L. L., Ohiienko M. M. 2021g.
Research of garden sprayer machines of near-stem
and inter-stem strips of orchards. IOP Conference
Series: Earth and Environmental Science. 723.
/723/2/022035.
Rogovskii I. L., Titova L. L., Sivak I. M. 2021h.
Research of machines for mulching near-trunk
strips in perennial fruit plantations. IOP
Conference Series: Earth and Environmental
Science. 723. 042041. https://doi.org/
1088/1755-1315/723/4/042041.
Rogovskii I. L., Titova L. L., Solomka O. V. 2021j.
Research of sliding bearings with reverse friction
pair and inlaid liners made of thermoplastic
composite materials. Journal of Physics:
Conference Series. 1889. 042010.
https://doi.org/10.1088/1742-6596/1889/4/04
Rogovskii I. L. 2020. Model of stochastic process of
restoration of working capacity of agricultural
machine in inertial systems with delay. Machinery
& Energetics. Journal of Rural Production
Research. Kyiv. Ukraine, 11(3): 143-150.
Rogovskii I., Titova L., Novitskii A., Rebenko V. 2019.
Research of vibroacoustic diagnostics of fuel
system of engines of combine harvesters.
Engineering for Rural Development, 18: 291-298.
Sergejeva N., Aboltins A., Strupule L., Aboltina B.
Mathematical knowledge in elementary
school and for future engineers. Proceedings of
th International Scientific Conference
“Engineering for rural development”. Jelgava,
Latvia, May 23-25, 2018, Latvia University of
Agriculture. Faculty of Engineering, 17: 1166-
Titova L. L. 2021. Simulation of transitional processes
of dynamic model of power energy installation of
machines for forestry works. Machinery &
Energetics. Journal of Rural Production
Research. Kyiv. Ukraine, 12(1): 147-154.
Viba J., Lavendelis E. 2006. Algorithm of synthesis of
strongly non-linear mechanical systems. In
Industrial Engineering – Innovation as
Competitive Edge for SME, 22 April 2006.
Tallinn, Estonia: 95-98.
Yata V. K., Tiwari B. C., Ahmad I. 2018. Nanoscience
in food and agriculture: research, industries and
patents. Environmental Chemistry Letters, 16: 79-
Zagurskiy О., Ohiienko M., Rogach S., Pokusa T., Titova
L., Rogovskii I. 2018. Global supply chain in
context of new model of economic growth.
Conceptual bases and trends for development of
social-economic processes. Monograph. Opole.
Poland: 64-74.